3-Stage Battery Charger: 24V, 7AAn ideal substitute for golf and mobility battery chargers.Designed to stay connected to batteries, guaranteeing precise charging and extending battery life. Includes a charge status LED that starts in red during the initial bulk charge, transitions to green when the batteries reach full charge, and then shifts to a float charge.Equipped with a standard 3-pin Neutrik plug...
Oxford Hoist ChargerThis Linak BAJ Battery Charger is suitable for the majority of UK mobile hoists. The Battery Charger includes a power lead. Be assured, all of our Spare Parts come with a 12 month warranty. If you require assistance, please call 01772 814 555, our team is here to help.Whats Included:ChargerPower LeadLinak BAJ Battery Charger introductionThe charger CHJ2 has been specially designed for use as a
wall-charger for the JUMBO system.
The CHJ2 charger is a Switch Mode Power Supply (SMPS)
version which makes charging of the batteries more
efficient.
BAJ1 and BAJL (standard) battery pack have a reduced
charging time.
Mains voltage from 100 V AC - 240 V AC (50/60 Hz) is
possible on same charger.
The charger indicates whether the charger is connected
to the mains (green LED) or whether the battery is being
charged (yellow LED). Medically approved.Features• Functional and elegant design
• Approx. charging time for BAJ1 / BAJL battery pack: 5 hours
• The charger is of the SMPS type (Switch Mode Power Supply)
• Mains voltage: 100 - 240 V / 50 - 60 Hz
• Yellow light diode indicates whether the battery is charging
• Green light diode indicates whether the charger is connected
to the mains
• Charging current up to 650 mA
• Protection class: IPX5 (only when mounted vertically)
• Colour: Bottom dark grey (RAL 7016) and top light grey
(RAL 7035)
• 3.2 m exchangeable mains cable (black straight)Options • 0.6 m coiled mains cable
• Customised front cover
• Cable hook for placing the mains cable
• Bottom cover for use when mounted on the MBJ3
mounting bracketUsage:
• Nominal current draw: Max. 400 mA
• Power consumption (standby): Max. 2.5 W
• Power consumption (charging): Max. 19 W
• Ambient temperature: + 5 °C to + 40 °C
• Storage temperature: - 10 °C to + 50 °C
• Relative humidity: 20% to 80% - non-condensing
• Atmospheric pressure: 700 to 1060 hPa
• Height above sea level: Max. 3000 meters
• Approvals: IEC60601-1, ANSI/AAMI ES60601 and
CAN / CSA-22.2 No 60601-1..
Invacare Robin ChargerThis Charger Kit is for the Invacare Robin Ceiling Hoist. Be assured, our Spare Parts come with a 12 Month Warranty. If you need assistance, please call 01772 814555, our team is here to help. Whats Included:ChargerWall Mounting BracketScrewsAbout the Invacare Robin Ceiling HoistThe Invacare Robin is a Ceiling Hoist that provides an innovative and unique form of transfer. The Robin has Dual Strap technology, meaning slings can be connected without a spreader bar. However, spreader bars can be attached for specific hoisting situations. The Robin also has an Emergency Stop/Lower for extra safety when lifting the patient. The Robins functions are controlled with a handset. The handset can also charge the Robin through the Holster. The Robin has a SWL (Safe Working load) of 200 kg and a Total Product Weight of 7.3 kg...
Molift Battery and Charger Kit: 14V NiMhThe Molift Power Pac is NiMH 14V is suitable for the Molift Smart, Quickraiser and Mover 180 hoists and is one of the most powerful hoist batteries on the market. Weighing as little as 2 Kg (4.4Lbs), this system will lift a 30+ stone person off the floor to his chair, more than 10 times between charges.Suitable for the following Molift lifting systems:- Molift 150- Molift Quickraiser 1, 2 and 2+- Mover 180 ..
Molift Quick Raiser 205 Charger and PowerPac 24V SLAThis is the complete battery & charger box suitable for the Molift Quick Raiser 205 Active & Stand UP. Charger Lead not included.About the Molift Quick Raiser 205The Molift Quick Raiser 205 Stand Aid has an outstanding lifting capacity and is designed to lift users comfortably and securely. The stable stand aid has a unique wheel position and an angled push bar for weight distribution. The stand aid also has easy manoeuvrability and a quick turning radius allowing it to be transferred through almost any environment including narrow spaces...
Invacare Robin Mover ChargerThis Charger Kit is for the Invacare Robin Ceiling Hoist. Be assured, our Spare Parts come with a 12 Month Warranty. If you need assistance, please call 01772 814555, our team is here to help. Whats Included:ChargerWall MountScrewsAbout the Invacare Robin Mover Ceiling HoistThe Invacare Robin Mover is a Ceiling Hoist that provides a unique form of transfer. The Robin Mover unlike the Robin, has a traverse motor. This means the Mover can move in 4 directions (Up/Down & Left/Right across a rail). The Handset provided with the Mover controls the ceiling hoists functions. The Robin Mover has a SWL (Safe Working load) of 200 kg and a Total Product Weight of 9.5 kg...
Molift Battery and Charger Kit: 26 V NiMh The Molift Power Pac is NiMH 26 V is suitable for the Molift Mover 205, 300 and Molift Partner 255 hoists and is one of the most powerful hoist batteries on the market. Weighing as little as 2 Kg (4.4Lbs), this system will lift a 30+ stone person off the floor to his chair, more than 10 times between charges.
Suitable for the following Molift lifting systems:
- Mover 205- Mover 300- Partner 255 ..
Molift Quick Raiser 1 Battery ChargerMolift Battery charger is small, lightweight and easy to use. When the charge is complete, it will keep topped up. It is recommended to run battery flat at least every 2 months and then fully charge to prolong its life.
- Battery Power Cable included- Battery Not Included Suitable the following Molift lifting systems:- Smart 150 (and previous versions)- Mover 180- Mover 300- Mover 205- Partner 255- Quick Raiser 1- Quick Raiser 2- Quick Raiser 2 +
Important: If you have the old version of battery which has a black top, you'll need the new version of battery charger as the old metal charger, will not charge the green top batteries. The new charger, however, will charge any existing black top batteries.About the Molift Quick Raiser 1The Molift Quick Raser 1 has a SWL (Safe Working Load) 160Kg (352lbs) it's a stand aid that assists service users who can weight bare, to stand easily to transfer from Chair to Bed, Bed to wheelchair, Chair to toilet and even change whilst in the raised position. Call
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype..
Oxford Classic 4 Pin ChargerThe Charger is for the Oxford Midi 150. If you need the Oxford Classic Charger which has the Cliff Plug, Please look at Oxford Midi 150 Charger with Cliff Plug.The charger is specifically for the Pre-March 2003 version of this hoist and has a 4-pin connector. Be assured, all of our Spare Parts come with a 12 Month Warranty. If you need assistance, please call 01772 814555, our team is here to help. ..
Oxford Journey Battery Charger (with power lead)This desktop battery charger is for the Oxford Journey Stand Aid. This charger includes a power lead. Be assured, all of out Spare Parts come with a 12 Month Warranty. If you require assistance, please call 01772 814 555, our team is here to help.Whats Included:ChargerPower LeadAbout the Oxford Journey Stand AidThe Oxford Journey stand aid is ideal for safe maneuvering and is designed to take the strain out of transportation. The folding design makes the hoist easy to store and transport whilst the unique adjustable cow horn function allows for ease of use. With the removable foot tray, the Journey transforms into rehabilitation aid allowing the patient to fully stand. The Smart TM monitor records data useful to the user and carer including total lift actuations (work completed), lift overloads (exceeding the SWL), identify service needed, increasing patient safety (by providing relevant/important data) and increasing the product service life. Standing and transport slings can be also applied to the Journey. ..
Oxford Power Cradle ChargerThis Battery charger is for Oxford 4 Point Powered Positioning Cradle. Be assured, all of our Spare Parts come with a 12 Month Warranty. If you need assistance, please call 01772 814555, our team is here to help. ..
Molift Quick Raiser 2 Battery ChargerMolift Battery charger is small, lightweight and easy to use. When the charge is complete, it will keep topped up. It is recommended to run battery flat at least every 2 months and then fully charge to prolong its life.
- Battery Power Cable included- Battery Not Included Suitable the following Molift lifting systems:- Smart 150 (and previous versions)- Mover 180- Mover 300- Mover 205- Partner 255- Quick Raiser 1- Quick Raiser 2- Quick Raiser 2 +
Important: If you have the old version of battery which has a black top, you'll need the new version of battery charger as the old metal charger, will not charge the green top batteries. The new charger, however, will charge any existing black top batteries.About the Molift Quick Raiser 2Molift Quick Raiser 2 has a SWL (Safe Working Load) of 160Kg (352lbs) and is a stand aid that assists bariatric users. The Raiser 2 who can help users to stand easily and transfer. The Quick Raiser 2 has electrically adjustable legs.Call
Send SMS
Add to Skype
You'll need Skype CreditFree via Skype..